head     1.1;
branch   1.1.1;
access   ;
symbols  start:1.1.1.1 pro:1.1.1;
locks    ; strict;
comment  @# @;


1.1
date     2006.07.21.03.52.41;  author kaurikim;  state Exp;
branches 1.1.1.1;
next     ;

1.1.1.1
date     2006.07.21.03.52.41;  author kaurikim;  state Exp;
branches ;
next     ;


desc
@@



1.1
log
@Initial revision
@
text
@*** The StrongARM version of the CerfBoard/Cube has been discontinued ***

The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
that measures approximately 2" square. It includes an Ethernet
controller, an RS232-compatible serial port, a USB function port, and
one CompactFlash+ slot on the back. Pictures can be found at the
Intrinsyc website, http://www.intrinsyc.com.

This document describes the support in the Linux kernel for the
Intrinsyc CerfBoard.

Supported in this version:
   - CompactFlash+ slot (select PCMCIA in General Setup and any options
     that may be required)
   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
     Network Devices)
   - Serial ports with a serial console (hardcoded to 38400 8N1)

In order to get this kernel onto your Cerf, you need a server that runs
both BOOTP and TFTP. Detailed instructions should have come with your
evaluation kit on how to use the bootloader. This series of commands
will suffice:

   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
   make ARCH=arm CROSS_COMPILE=arm-linux- modules
   cp arch/arm/boot/zImage <TFTP directory>

support@@intrinsyc.com
@


1.1.1.1
log
@linux 2.6.13.5
@
text
@@
