head     1.1;
branch   1.1.1;
access   ;
symbols  start:1.1.1.1 pro:1.1.1;
locks    ; strict;
comment  @# @;


1.1
date     2006.07.21.03.52.45;  author kaurikim;  state Exp;
branches 1.1.1.1;
next     ;

1.1.1.1
date     2006.07.21.03.52.45;  author kaurikim;  state Exp;
branches ;
next     ;


desc
@@



1.1
log
@Initial revision
@
text
@To configure the Crystal CS423x sound chip and activate its DSP functions,
modules may be loaded in this order:
  
	modprobe sound
	insmod ad1848
	insmod uart401
	insmod cs4232 io=* irq=* dma=* dma2=*
  
This is the meaning of the parameters:
  
	io--I/O address of the Windows Sound System (normally 0x534)
	irq--IRQ of this device
	dma and dma2--DMA channels (DMA2 may be 0)
  
On some cards, the board attempts to do non-PnP setup, and fails.  If you
have problems, use Linux' PnP facilities. 
  
To get MIDI facilities add
  
	insmod opl3 io=*
  
where "io" is the I/O address of the OPL3 synthesizer. This will be shown
in /proc/sys/pnp and is normally 0x388.
@


1.1.1.1
log
@linux 2.6.13.5
@
text
@@
